kwikLYNX - TOYOTA SWAY BAR DISCONNECT (Front)

BE SURE TO SELECT THE CORRECT THREAD PITCH BEFORE CHECKING OUT. 

SKU X02-07-001 - M14x1.5 Ball Joint Thread Pitch - $750 

SKU X02-07-002 - M14x2.0 Delta Joint Thread Pitch - $750 (FITS ICON DELTA BALL JOINT)

Finally! A high quality sway-bar disconnect for the Toyota 4Runner, Tacoma, FJ and GX. The APEX kwikLYNX allow you to easily disconnect and reconnect your sway-bar for off-road use. Doing so greatly improves your overall ride quality and off-road experience.

For Toyota/Lexus models:

• 4Runner | 2003 - 2024 (4th & 5th Gen)
• Tacoma | 2005 - 2023 (2nd & 3rd Gen)
• FJ Cruiser | 2007 & Later
• GX470 | 2003 - 2009
• GX460 | 2010 & Later  

IMPORTANT! NOT COMPATIBLE WITH KDSS EQUIPPED VEHICLES. KWIKLYNX CAN BE ADAPTED TO THE GX460 BUT THE FACTORY KDSS SYSTEM MUST BE REMOVED. MUST SOURCE A REGULAR GX470/4RUNNER SWAYBAR TO USE IN PLACE OF THE KDSS SWAYBAR.

•  If your vehicle is equipped with a TRD skid plate it will need to be trimmed to clear the air link.
• If installing with uniball stye upper control arms, you will need to install using a M14x1.5 bolt. USE ONLY GRADE 10.9 BOLT! Bolt must not extend more than .900" from the bottom of the spindle surface.
• Not compatible with aftermarket spindle gussets THEY ARE COMPATIBLE WITH OUR BOLT ON SPINDLE GUSSET

The installation of this product requires a 13MM drill bit. CLICK HERE to purchase our 13MM step drill bit.

PLEASE WATCH THE INSTALL VIDEO BEFORE ATTEMPTING TO INSTALL:  CLICK HERE TO WATCH